david/librubberband
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
ad1811b8a1f35584b9f3e968057550506454053e
librubberband/src/faster/StretcherProcess.cpp

1305 lines
40 KiB
C++
Raw Blame History

/* -*- c-basic-offset: 4 indent-tabs-mode: nil -*- vi:set ts=8 sts=4 sw=4: */
/*
Rubber Band Library
An audio time-stretching and pitch-shifting library.
Copyright 2007-2024 Particular Programs Ltd.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version. See the file
COPYING included with this distribution for more information.
Alternatively, if you have a valid commercial licence for the
Rubber Band Library obtained by agreement with the copyright
holders, you may redistribute and/or modify it under the terms
described in that licence.
If you wish to distribute code using the Rubber Band Library
under terms other than those of the GNU General Public License,
you must obtain a valid commercial licence before doing so.
*/
#include "R2Stretcher.h"
#include "StretcherChannelData.h"
#include "../common/StretchCalculator.h"
#include "../common/Resampler.h"
#include "../common/Profiler.h"
#include "../common/VectorOps.h"
#include "../common/sysutils.h"
#include "../common/mathmisc.h"
#include <cassert>
#include <cmath>
#include <set>
#include <map>
#include <deque>
#include <algorithm>
using namespace RubberBand;
namespace RubberBand {
#ifndef NO_THREADING
R2Stretcher::ProcessThread::ProcessThread(R2Stretcher *s, size_t c) :
m_s(s),
m_channel(c),
m_dataAvailable(std::string("data ") + char('A' + c)),
m_abandoning(false)
{ }
void
R2Stretcher::ProcessThread::run()
{
m_s->m_log.log(2, "thread getting going for channel", m_channel);
ChannelData &cd = *m_s->m_channelData[m_channel];
while (cd.inputSize == -1 ||
cd.inbuf->getReadSpace() > 0) {
bool any = false, last = false;
m_s->processChunks(m_channel, any, last);
if (last) break;
if (any) {
m_s->m_spaceAvailable.lock();
m_s->m_spaceAvailable.signal();
m_s->m_spaceAvailable.unlock();
}
m_dataAvailable.lock();
if (!m_s->testInbufReadSpace(m_channel) && !m_abandoning) {
m_dataAvailable.wait(50000); // bounded in case of abandonment
}
m_dataAvailable.unlock();
if (m_abandoning) {
m_s->m_log.log(2, "thread abandoning for channel", m_channel);
return;
}
}
bool any = false, last = false;
m_s->processChunks(m_channel, any, last);
m_s->m_spaceAvailable.lock();
m_s->m_spaceAvailable.signal();
m_s->m_spaceAvailable.unlock();
m_s->m_log.log(2, "thread done for channel", m_channel);
}
void
R2Stretcher::ProcessThread::signalDataAvailable()
{
m_dataAvailable.lock();
m_dataAvailable.signal();
m_dataAvailable.unlock();
}
void
R2Stretcher::ProcessThread::abandon()
{
m_abandoning = true;
}
#endif
bool
R2Stretcher::resampleBeforeStretching() const
{
// We can't resample before stretching in offline mode, because
// the stretch calculation is based on doing it the other way
// around. It would take more work (and testing) to enable this.
if (!m_realtime) return false;
if (m_options & RubberBandStretcher::OptionPitchHighQuality) {
return (m_pitchScale < 1.0); // better sound
} else if (m_options & RubberBandStretcher::OptionPitchHighConsistency) {
return false;
} else {
return (m_pitchScale > 1.0); // better performance
}
}
void
R2Stretcher::prepareChannelMS(size_t c,
const float *const *inputs,
size_t offset,
size_t samples,
float *prepared)
{
for (size_t i = 0; i < samples; ++i) {
float left = inputs[0][i + offset];
float right = inputs[1][i + offset];
float mid = (left + right) / 2;
float side = (left - right) / 2;
if (c == 0) {
prepared[i] = mid;
} else {
prepared[i] = side;
}
}
}
size_t
R2Stretcher::consumeChannel(size_t c,
const float *const *inputs,
size_t offset,
size_t samples,
bool final)
{
Profiler profiler("R2Stretcher::consumeChannel");
ChannelData &cd = *m_channelData[c];
RingBuffer<float> &inbuf = *cd.inbuf;
size_t toWrite = samples;
size_t writable = inbuf.getWriteSpace();
bool resampling = resampleBeforeStretching();
const float *input = 0;
bool useMidSide =
((m_options & RubberBandStretcher::OptionChannelsTogether) &&
(m_channels >= 2) &&
(c < 2));
if (resampling) {
Profiler profiler2("R2Stretcher::resample");
toWrite = int(ceil(samples / m_pitchScale));
bool shortened = false;
if (writable < toWrite) {
samples = int(floor(writable * m_pitchScale));
shortened = true;
if (samples == 0) return 0;
}
if (useMidSide) {
// Our pre-resample buffer size is also constrained by a
// buffer (cd.ms) of the same size as cd.inbuf
size_t ibsz = cd.inbuf->getSize();
if (ibsz < samples) {
samples = ibsz;
}
}
size_t reqSize = int(ceil(samples / m_pitchScale));
if (reqSize > cd.resamplebufSize) {
m_log.log(0, "WARNING: R2Stretcher::consumeChannel: resizing resampler buffer from and to", cd.resamplebufSize, reqSize);
cd.setResampleBufSize(reqSize);
}
#if defined(STRETCHER_IMPL_RESAMPLER_MUTEX_REQUIRED)
if (m_threaded) {
m_resamplerMutex.lock();
}
#endif
if (useMidSide) {
prepareChannelMS(c, inputs, offset, samples, cd.ms);
input = cd.ms;
} else {
input = inputs[c] + offset;
}
toWrite = cd.resampler->resample(&cd.resamplebuf,
cd.resamplebufSize,
&input,
samples,
1.0 / m_pitchScale,
final && !shortened);
#if defined(STRETCHER_IMPL_RESAMPLER_MUTEX_REQUIRED)
if (m_threaded) {
m_resamplerMutex.unlock();
}
#endif
}
if (writable < toWrite) {
if (resampling) {
m_log.log(1, "consumeChannel: resampler produced too much output, cannot use", toWrite, writable);
return 0;
}
toWrite = writable;
}
if (resampling) {
inbuf.write(cd.resamplebuf, toWrite);
cd.inCount += samples;
m_log.log(2, "consumeChannel: wrote to inbuf from resamplebuf, inCount now", toWrite, cd.inCount);
return samples;
} else {
if (useMidSide) {
prepareChannelMS(c, inputs, offset, toWrite, cd.ms);
input = cd.ms;
} else {
input = inputs[c] + offset;
}
inbuf.write(input, toWrite);
cd.inCount += toWrite;
m_log.log(2, "consumeChannel: wrote to inbuf from input, inCount now", toWrite, cd.inCount);
return toWrite;
}
}
void
R2Stretcher::processChunks(size_t c, bool &any, bool &last)
{
Profiler profiler("R2Stretcher::processChunks");
// Process as many chunks as there are available on the input
// buffer for channel c. This requires that the increments have
// already been calculated.
// This is the normal process method in offline mode.
ChannelData &cd = *m_channelData[c];
last = false;
any = false;
float *tmp = 0;
while (!last) {
if (!testInbufReadSpace(c)) {
m_log.log(2, "processChunks: out of input");
break;
}
any = true;
if (!cd.draining) {
size_t ready = cd.inbuf->getReadSpace();
assert(ready >= m_aWindowSize || cd.inputSize >= 0);
cd.inbuf->peek(cd.fltbuf, std::min(ready, m_aWindowSize));
cd.inbuf->skip(m_increment);
}
bool phaseReset = false;
size_t phaseIncrement, shiftIncrement;
getIncrements(c, phaseIncrement, shiftIncrement, phaseReset);
if (shiftIncrement <= m_aWindowSize) {
analyseChunk(c);
last = processChunkForChannel
(c, phaseIncrement, shiftIncrement, phaseReset);
} else {
size_t bit = m_aWindowSize/4;
m_log.log(2, "breaking down overlong increment into chunks from and to", shiftIncrement, bit);
if (!tmp) tmp = allocate<float>(m_aWindowSize);
analyseChunk(c);
v_copy(tmp, cd.fltbuf, m_aWindowSize);
for (size_t i = 0; i < shiftIncrement; i += bit) {
v_copy(cd.fltbuf, tmp, m_aWindowSize);
size_t thisIncrement = bit;
if (i + thisIncrement > shiftIncrement) {
thisIncrement = shiftIncrement - i;
}
last = processChunkForChannel
(c, phaseIncrement + i, thisIncrement, phaseReset);
phaseReset = false;
}
}
cd.chunkCount++;
m_log.log(3, "channel/last", c, last);
m_log.log(3, "channel/chunkCount", c, cd.chunkCount);
}
if (tmp) deallocate(tmp);
}
bool
R2Stretcher::processOneChunk()
{
Profiler profiler("R2Stretcher::processOneChunk");
m_log.log(3, "R2Stretcher::processOneChunk");
// Process a single chunk for all channels, provided there is
// enough data on each channel for at least one chunk. This is
// able to calculate increments as it goes along.
// This is the normal process method in RT mode.
for (size_t c = 0; c < m_channels; ++c) {
if (!testInbufReadSpace(c)) {
m_log.log(2, "processOneChunk: out of input");
return false;
}
ChannelData &cd = *m_channelData[c];
m_log.log(2, "read space and draining", cd.inbuf->getReadSpace(), cd.draining);
if (!cd.draining) {
size_t ready = cd.inbuf->getReadSpace();
assert(ready >= m_aWindowSize || cd.inputSize >= 0);
cd.inbuf->peek(cd.fltbuf, std::min(ready, m_aWindowSize));
cd.inbuf->skip(m_increment);
analyseChunk(c);
}
}
bool phaseReset = false;
size_t phaseIncrement, shiftIncrement;
if (!getIncrements(0, phaseIncrement, shiftIncrement, phaseReset)) {
calculateIncrements(phaseIncrement, shiftIncrement, phaseReset);
}
bool last = false;
for (size_t c = 0; c < m_channels; ++c) {
last = processChunkForChannel(c, phaseIncrement, shiftIncrement, phaseReset);
m_channelData[c]->chunkCount++;
}
m_log.log(3, "R2Stretcher::processOneChunk returning", last);
return last;
}
bool
R2Stretcher::testInbufReadSpace(size_t c)
{
Profiler profiler("R2Stretcher::testInbufReadSpace");
ChannelData &cd = *m_channelData[c];
RingBuffer<float> &inbuf = *cd.inbuf;
size_t rs = inbuf.getReadSpace();
if (rs < m_aWindowSize && !cd.draining) {
if (cd.inputSize == -1) {
// Not all the input data has been written to the inbuf
// (that's why the input size is not yet set). We can't
// process, because we don't have a full chunk of data, so
// our process chunk would contain some empty padding in
// its input -- and that would give incorrect output, as
// we know there is more input to come.
#ifndef NO_THREADING
if (!m_threaded) {
#endif
m_log.log(2, "Note: read space < chunk size when not all input written", inbuf.getReadSpace(), m_aWindowSize);
#ifndef NO_THREADING
}
#endif
return false;
}
if (rs == 0) {
m_log.log(2, "read space = 0, giving up");
return false;
} else if (rs < m_aWindowSize/2) {
m_log.log(2, "setting draining true with read space and window size", rs, m_aWindowSize);
m_log.log(2, "outbuf read space is", cd.outbuf->getReadSpace());
m_log.log(2, "accumulator fill is", cd.accumulatorFill);
cd.draining = true;
}
}
return true;
}
bool
R2Stretcher::processChunkForChannel(size_t c,
size_t phaseIncrement,
size_t shiftIncrement,
bool phaseReset)
{
Profiler profiler("R2Stretcher::processChunkForChannel");
// Process a single chunk on a single channel. This assumes
// enough input data is available; caller must have tested this
// using e.g. testInbufReadSpace first. Return true if this is
// the last chunk on the channel.
if (phaseReset) {
m_log.log(2, "processChunkForChannel: phase reset found, increments",
phaseIncrement, shiftIncrement);
}
ChannelData &cd = *m_channelData[c];
if (!cd.draining) {
// This is the normal processing case -- draining is only
// set when all the input has been used and we only need
// to write from the existing accumulator into the output.
// We know we have enough samples available in m_inbuf --
// this is usually m_aWindowSize, but we know that if fewer
// are available, it's OK to use zeroes for the rest
// (which the ring buffer will provide) because we've
// reached the true end of the data.
// We need to peek m_aWindowSize samples for processing, and
// then skip m_increment to advance the read pointer.
modifyChunk(c, phaseIncrement, phaseReset);
synthesiseChunk(c, shiftIncrement); // reads from cd.mag, cd.phase
if (m_log.getDebugLevel() > 2) {
if (phaseReset) {
for (int i = 0; i < 10; ++i) {
cd.accumulator[i] = 1.2f - (i % 3) * 1.2f;
}
}
}
}
bool last = false;
if (cd.draining) {
m_log.log(2, "draining: accumulator fill and shift increment", cd.accumulatorFill, shiftIncrement);
m_log.log(2, "outbuf read space is", cd.outbuf->getReadSpace());
if (cd.accumulatorFill == 0) {
m_log.log(2, "draining: accumulator empty");
return true;
}
if (shiftIncrement == 0) {
m_log.log(0, "WARNING: draining: shiftIncrement == 0, can't handle that in this context: setting to", m_increment);
shiftIncrement = m_increment;
}
if (cd.accumulatorFill <= shiftIncrement) {
m_log.log(2, "draining: marking as last and reducing shift increment from and to", shiftIncrement, cd.accumulatorFill);
shiftIncrement = cd.accumulatorFill;
last = true;
}
}
int required = shiftIncrement;
if (m_pitchScale != 1.0) {
required = int(required / m_pitchScale) + 1;
}
int ws = cd.outbuf->getWriteSpace();
if (ws < required) {
m_log.log(1, "Buffer overrun on output for channel", c);
// The only correct thing we can do here is resize the buffer.
// We can't wait for the client thread to read some data out
// from the buffer so as to make more space, because the
// client thread (if we are threaded at all) is probably stuck
// in a process() call waiting for us to stow away enough
// input increments to allow the process() call to complete.
// This is an unhappy situation.
RingBuffer<float> *oldbuf = cd.outbuf;
cd.outbuf = oldbuf->resized(oldbuf->getSize() * 2);
m_log.log(2, "write space and space needed", ws, required);
m_log.log(2, "resized output buffer from and to", oldbuf->getSize(),
cd.outbuf->getSize());
m_emergencyScavenger.claim(oldbuf);
}
writeChunk(c, shiftIncrement, last);
m_log.log(3, "processChunkForChannel: accumulatorFill now; returning", cd.accumulatorFill, last);
return last;
}
void
R2Stretcher::calculateIncrements(size_t &phaseIncrementRtn,
size_t &shiftIncrementRtn,
bool &phaseReset)
{
Profiler profiler("R2Stretcher::calculateIncrements");
// Calculate the next upcoming phase and shift increment, on the
// basis that both channels are in sync. This is in contrast to
// getIncrements, which requires that all the increments have been
// calculated in advance but can then return increments
// corresponding to different chunks in different channels.
// Requires frequency domain representations of channel data in
// the mag and phase buffers in the channel.
// This function is only used in real-time mode.
phaseIncrementRtn = m_increment;
shiftIncrementRtn = m_increment;
phaseReset = false;
if (m_channels == 0) return;
ChannelData &cd = *m_channelData[0];
size_t bc = cd.chunkCount;
for (size_t c = 1; c < m_channels; ++c) {
if (m_channelData[c]->chunkCount != bc) {
m_log.log(0, "ERROR: R2Stretcher::calculateIncrements: Channels are not in sync");
return;
}
}
const int hs = m_fftSize/2 + 1;
// Normally we would mix down the time-domain signal and apply a
// single FFT, or else mix down the Cartesian form of the
// frequency-domain signal. Both of those would be inefficient
// from this position. Fortunately, the onset detectors should
// work reasonably well (maybe even better?) if we just sum the
// magnitudes of the frequency-domain channel signals and forget
// about phase entirely. Normally we don't expect the channel
// phases to cancel each other, and broadband effects will still
// be apparent.
float df = 0.f;
bool silent = false;
if (m_channels == 1) {
if (sizeof(process_t) == sizeof(double)) {
df = m_phaseResetAudioCurve->processDouble((double *)cd.mag, m_increment);
silent = (m_silentAudioCurve->processDouble((double *)cd.mag, m_increment) > 0.f);
} else {
df = m_phaseResetAudioCurve->processFloat((float *)cd.mag, m_increment);
silent = (m_silentAudioCurve->processFloat((float *)cd.mag, m_increment) > 0.f);
}
} else {
process_t *tmp = (process_t *)alloca(hs * sizeof(process_t));
v_zero(tmp, hs);
for (size_t c = 0; c < m_channels; ++c) {
v_add(tmp, m_channelData[c]->mag, hs);
}
if (sizeof(process_t) == sizeof(double)) {
df = m_phaseResetAudioCurve->processDouble((double *)tmp, m_increment);
silent = (m_silentAudioCurve->processDouble((double *)tmp, m_increment) > 0.f);
} else {
df = m_phaseResetAudioCurve->processFloat((float *)tmp, m_increment);
silent = (m_silentAudioCurve->processFloat((float *)tmp, m_increment) > 0.f);
}
}
double effectivePitchRatio = 1.0 / m_pitchScale;
if (cd.resampler) {
effectivePitchRatio = cd.resampler->getEffectiveRatio(effectivePitchRatio);
}
int incr = m_stretchCalculator->calculateSingle
(m_timeRatio, effectivePitchRatio, df, m_increment,
m_aWindowSize, m_sWindowSize, false);
if (m_lastProcessPhaseResetDf.getWriteSpace() > 0) {
m_lastProcessPhaseResetDf.write(&df, 1);
}
if (m_lastProcessOutputIncrements.getWriteSpace() > 0) {
m_lastProcessOutputIncrements.write(&incr, 1);
}
if (incr < 0) {
phaseReset = true;
incr = -incr;
}
// The returned increment is the phase increment. The shift
// increment for one chunk is the same as the phase increment for
// the following chunk (see comment below). This means we don't
// actually know the shift increment until we see the following
// phase increment... which is a bit of a problem.
// This implies we should use this increment for the shift
// increment, and make the following phase increment the same as
// it. This means in RT mode we'll be one chunk later with our
// phase reset than we would be in non-RT mode. The sensitivity
// of the broadband onset detector may mean that this isn't a
// problem -- test it and see.
shiftIncrementRtn = incr;
if (cd.prevIncrement == 0) {
phaseIncrementRtn = shiftIncrementRtn;
} else {
phaseIncrementRtn = cd.prevIncrement;
}
cd.prevIncrement = shiftIncrementRtn;
if (silent) ++m_silentHistory;
else m_silentHistory = 0;
if (m_silentHistory >= int(m_aWindowSize / m_increment) && !phaseReset) {
phaseReset = true;
m_log.log(2, "calculateIncrements: phase reset on silence: silent history", m_silentHistory);
}
}
bool
R2Stretcher::getIncrements(size_t channel,
size_t &phaseIncrementRtn,
size_t &shiftIncrementRtn,
bool &phaseReset)
{
Profiler profiler("R2Stretcher::getIncrements");
if (channel >= m_channels) {
phaseIncrementRtn = m_increment;
shiftIncrementRtn = m_increment;
phaseReset = false;
return false;
}
// There are two relevant output increments here. The first is
// the phase increment which we use when recalculating the phases
// for the current chunk; the second is the shift increment used
// to determine how far to shift the processing buffer after
// writing the chunk. The shift increment for one chunk is the
// same as the phase increment for the following chunk.
// When an onset occurs for which we need to reset phases, the
// increment given will be negative.
// When we reset phases, the previous shift increment (and so
// current phase increments) must have been m_increment to ensure
// consistency.
// m_outputIncrements stores phase increments.
ChannelData &cd = *m_channelData[channel];
bool gotData = true;
if (cd.chunkCount >= m_outputIncrements.size()) {
if (m_outputIncrements.size() == 0) {
phaseIncrementRtn = m_increment;
shiftIncrementRtn = m_increment;
phaseReset = false;
return false;
} else {
cd.chunkCount = m_outputIncrements.size()-1;
gotData = false;
}
}
int phaseIncrement = m_outputIncrements[cd.chunkCount];
int shiftIncrement = phaseIncrement;
if (cd.chunkCount + 1 < m_outputIncrements.size()) {
shiftIncrement = m_outputIncrements[cd.chunkCount + 1];
}
if (phaseIncrement < 0) {
phaseIncrement = -phaseIncrement;
phaseReset = true;
}
if (shiftIncrement < 0) {
shiftIncrement = -shiftIncrement;
}
if (shiftIncrement >= int(m_aWindowSize)) {
m_log.log(1, "WARNING: shiftIncrement >= analysis window size", shiftIncrement, m_aWindowSize);
m_log.log(1, "at chunk of total", cd.chunkCount, m_outputIncrements.size());
}
phaseIncrementRtn = phaseIncrement;
shiftIncrementRtn = shiftIncrement;
if (cd.chunkCount == 0) phaseReset = true; // don't mess with the first chunk
return gotData;
}
void
R2Stretcher::analyseChunk(size_t channel)
{
Profiler profiler("R2Stretcher::analyseChunk");
ChannelData &cd = *m_channelData[channel];
process_t *const R__ dblbuf = cd.dblbuf;
float *const R__ fltbuf = cd.fltbuf;
// cd.fltbuf is known to contain m_aWindowSize samples
if (m_aWindowSize > m_fftSize) {
m_afilter->cut(fltbuf);
}
cutShiftAndFold(dblbuf, m_fftSize, fltbuf, m_awindow);
cd.fft->forwardPolar(dblbuf, cd.mag, cd.phase);
}
void
R2Stretcher::modifyChunk(size_t channel,
size_t outputIncrement,
bool phaseReset)
{
Profiler profiler("R2Stretcher::modifyChunk");
ChannelData &cd = *m_channelData[channel];
if (phaseReset) {
m_log.log(2, "phase reset: leaving phases unmodified");
}
const process_t rate = process_t(m_sampleRate);
const int count = m_fftSize / 2;
bool unchanged = cd.unchanged && (outputIncrement == m_increment);
bool fullReset = phaseReset;
bool laminar = !(m_options & RubberBandStretcher::OptionPhaseIndependent);
bool bandlimited = (m_options & RubberBandStretcher::OptionTransientsMixed);
int bandlow = lrint((150 * m_fftSize) / rate);
int bandhigh = lrint((1000 * m_fftSize) / rate);
float r = getEffectiveRatio();
bool unity = (fabsf(r - 1.f) < 1.e-6f);
if (unity) {
if (!phaseReset) {
phaseReset = true;
bandlimited = true;
bandlow = lrint((cd.unityResetLow * m_fftSize) / rate);
bandhigh = count;
if (bandlow > 0) {
m_log.log(2, "unity: bandlow & high", bandlow, bandhigh);
}
}
cd.unityResetLow *= 0.9f;
} else {
cd.unityResetLow = 16000.f;
}
float freq0 = m_freq0;
float freq1 = m_freq1;
float freq2 = m_freq2;
if (laminar) {
if (r > 1) {
float rf0 = 600 + (600 * ((r-1)*(r-1)*(r-1)*2));
float f1ratio = freq1 / freq0;
float f2ratio = freq2 / freq0;
freq0 = std::max(freq0, rf0);
freq1 = freq0 * f1ratio;
freq2 = freq0 * f2ratio;
}
}
int limit0 = lrint((freq0 * m_fftSize) / rate);
int limit1 = lrint((freq1 * m_fftSize) / rate);
int limit2 = lrint((freq2 * m_fftSize) / rate);
if (limit1 < limit0) limit1 = limit0;
if (limit2 < limit1) limit2 = limit1;
process_t prevInstability = 0.0;
bool prevDirection = false;
process_t distance = 0.0;
const process_t maxdist = 8.0;
const int lookback = 1;
process_t distacc = 0.0;
for (int i = count; i >= 0; i -= lookback) {
bool resetThis = phaseReset;
if (bandlimited) {
if (resetThis) {
if (i > bandlow && i < bandhigh) {
resetThis = false;
fullReset = false;
}
}
}
process_t p = cd.phase[i];
process_t perr = 0.0;
process_t outphase = p;
process_t mi = maxdist;
if (i <= limit0) mi = 0.0;
else if (i <= limit1) mi = 1.0;
else if (i <= limit2) mi = 3.0;
if (!resetThis) {
process_t omega = (2 * M_PI * m_increment * i) / (m_fftSize);
process_t pp = cd.prevPhase[i];
process_t ep = pp + omega;
perr = princarg(p - ep);
process_t instability = fabs(perr - cd.prevError[i]);
bool direction = (perr > cd.prevError[i]);
bool inherit = false;
if (laminar) {
if (distance >= mi || i == count) {
inherit = false;
} else if (bandlimited && (i == bandhigh || i == bandlow)) {
inherit = false;
} else if (instability > prevInstability &&
direction == prevDirection) {
inherit = true;
}
}
process_t advance = outputIncrement * ((omega + perr) / m_increment);
if (inherit) {
process_t inherited =
cd.unwrappedPhase[i + lookback] - cd.prevPhase[i + lookback];
advance = ((advance * distance) +
(inherited * (maxdist - distance)))
/ maxdist;
outphase = p + advance;
distacc += distance;
distance += 1.0;
} else {
outphase = cd.unwrappedPhase[i] + advance;
distance = 0.0;
}
prevInstability = instability;
prevDirection = direction;
} else {
distance = 0.0;
}
cd.prevError[i] = perr;
cd.prevPhase[i] = p;
cd.phase[i] = outphase;
cd.unwrappedPhase[i] = outphase;
}
m_log.log(3, "mean inheritance distance", distacc / count);
if (fullReset) unchanged = true;
cd.unchanged = unchanged;
if (unchanged) {
m_log.log(2, "frame unchanged on channel", channel);
}
}
void
R2Stretcher::formantShiftChunk(size_t channel)
{
Profiler profiler("R2Stretcher::formantShiftChunk");
ChannelData &cd = *m_channelData[channel];
process_t *const R__ mag = cd.mag;
process_t *const R__ envelope = cd.envelope;
process_t *const R__ dblbuf = cd.dblbuf;
const int sz = m_fftSize;
const int hs = sz / 2;
const process_t factor = 1.0 / sz;
cd.fft->inverseCepstral(mag, dblbuf);
const int cutoff = m_sampleRate / 700;
dblbuf[0] /= 2;
dblbuf[cutoff-1] /= 2;
for (int i = cutoff; i < sz; ++i) {
dblbuf[i] = 0.0;
}
v_scale(dblbuf, factor, cutoff);
process_t *spare = (process_t *)alloca((hs + 1) * sizeof(process_t));
cd.fft->forward(dblbuf, envelope, spare);
v_exp(envelope, hs + 1);
v_divide(mag, envelope, hs + 1);
if (m_pitchScale > 1.0) {
// scaling up, we want a new envelope that is lower by the pitch factor
for (int target = 0; target <= hs; ++target) {
int source = lrint(target * m_pitchScale);
if (source > hs) {
envelope[target] = 0.0;
} else {
envelope[target] = envelope[source];
}
}
} else {
// scaling down, we want a new envelope that is higher by the pitch factor
for (int target = hs; target > 0; ) {
--target;
int source = lrint(target * m_pitchScale);
envelope[target] = envelope[source];
}
}
v_multiply(mag, envelope, hs+1);
cd.unchanged = false;
}
void
R2Stretcher::synthesiseChunk(size_t channel,
size_t shiftIncrement)
{
Profiler profiler("R2Stretcher::synthesiseChunk");
if ((m_options & RubberBandStretcher::OptionFormantPreserved) &&
(m_pitchScale != 1.0)) {
formantShiftChunk(channel);
}
ChannelData &cd = *m_channelData[channel];
process_t *const R__ dblbuf = cd.dblbuf;
float *const R__ fltbuf = cd.fltbuf;
float *const R__ accumulator = cd.accumulator;
float *const R__ windowAccumulator = cd.windowAccumulator;
const int fsz = m_fftSize;
const int hs = fsz / 2;
const int wsz = m_sWindowSize;
if (!cd.unchanged) {
// Our FFTs produced unscaled results. Scale before inverse
// transform rather than after, to avoid overflow if using a
// fixed-point FFT.
float factor = 1.f / fsz;
v_scale(cd.mag, factor, hs + 1);
cd.fft->inversePolar(cd.mag, cd.phase, cd.dblbuf);
if (wsz == fsz) {
v_convert(fltbuf, dblbuf + hs, hs);
v_convert(fltbuf + hs, dblbuf, hs);
} else {
v_zero(fltbuf, wsz);
int j = fsz - wsz/2;
while (j < 0) j += fsz;
for (int i = 0; i < wsz; ++i) {
fltbuf[i] += dblbuf[j];
if (++j == fsz) j = 0;
}
}
}
if (wsz > fsz) {
int p = shiftIncrement * 2;
if (cd.interpolatorScale != p) {
SincWindow<float>::write(cd.interpolator, wsz, p);
cd.interpolatorScale = p;
}
v_multiply(fltbuf, cd.interpolator, wsz);
}
m_swindow->cut(fltbuf);
v_add(accumulator, fltbuf, wsz);
cd.accumulatorFill = std::max(cd.accumulatorFill, size_t(wsz));
if (wsz > fsz) {
// reuse fltbuf to calculate interpolating window shape for
// window accumulator
v_copy(fltbuf, cd.interpolator, wsz);
m_swindow->cut(fltbuf);
v_add(windowAccumulator, fltbuf, wsz);
} else {
m_swindow->add(windowAccumulator, m_awindow->getArea() * 1.5f);
}
}
void
R2Stretcher::writeChunk(size_t channel, size_t shiftIncrement, bool last)
{
Profiler profiler("R2Stretcher::writeChunk");
ChannelData &cd = *m_channelData[channel];
float *const R__ accumulator = cd.accumulator;
float *const R__ windowAccumulator = cd.windowAccumulator;
const int sz = cd.accumulatorFill;
const int si = shiftIncrement;
m_log.log(3, "writeChunk: channel and shiftIncrement",
channel, shiftIncrement);
if (last) {
m_log.log(3, "writeChunk: last true");
}
v_divide(accumulator, windowAccumulator, si);
// for exact sample scaling (probably not meaningful if we
// were running in RT mode)
size_t theoreticalOut = 0;
if (cd.inputSize >= 0) {
theoreticalOut = lrint(cd.inputSize * m_timeRatio);
}
bool resampledAlready = resampleBeforeStretching();
if (!resampledAlready &&
(m_pitchScale != 1.0 ||
(m_options & RubberBandStretcher::OptionPitchHighConsistency)) &&
cd.resampler) {
Profiler profiler2("R2Stretcher::resample");
size_t reqSize = int(ceil(si / m_pitchScale));
if (reqSize > cd.resamplebufSize) {
// This shouldn't normally happen -- the buffer is
// supposed to be initialised with enough space in the
// first place. But we retain this check in case the
// pitch scale has changed since then, or the stretch
// calculator has gone mad, or something.
m_log.log(0, "WARNING: R2Stretcher::writeChunk: resizing resampler buffer from and to", cd.resamplebufSize, reqSize);
cd.setResampleBufSize(reqSize);
}
#if defined(STRETCHER_IMPL_RESAMPLER_MUTEX_REQUIRED)
if (m_threaded) {
m_resamplerMutex.lock();
}
#endif
size_t outframes = cd.resampler->resample(&cd.resamplebuf,
cd.resamplebufSize,
&cd.accumulator,
si,
1.0 / m_pitchScale,
last);
#if defined(STRETCHER_IMPL_RESAMPLER_MUTEX_REQUIRED)
if (m_threaded) {
m_resamplerMutex.unlock();
}
#endif
writeOutput(*cd.outbuf, cd.resamplebuf,
outframes, cd.outCount, theoreticalOut);
} else {
writeOutput(*cd.outbuf, accumulator,
si, cd.outCount, theoreticalOut);
}
v_move(accumulator, accumulator + si, sz - si);
v_zero(accumulator + sz - si, si);
v_move(windowAccumulator, windowAccumulator + si, sz - si);
v_zero(windowAccumulator + sz - si, si);
if (int(cd.accumulatorFill) > si) {
cd.accumulatorFill -= si;
} else {
cd.accumulatorFill = 0;
if (cd.draining) {
m_log.log(2, "writeChunk: setting outputComplete to true");
cd.outputComplete = true;
}
}
m_log.log(3, "writeChunk: accumulatorFill now", cd.accumulatorFill);
}
void
R2Stretcher::writeOutput(RingBuffer<float> &to,
float *from, size_t qty,
size_t &outCount, size_t theoreticalOut)
{
Profiler profiler("R2Stretcher::writeOutput");
// In non-RT mode, we don't want to write the first startSkip
// samples, because the first chunk is centred on the start of the
// output. In RT mode we didn't apply any pre-padding in
// configure(), so we don't want to remove any here.
size_t startSkip = 0;
if (!m_realtime) {
startSkip = lrintf((m_sWindowSize/2) / m_pitchScale);
}
if (outCount > startSkip) {
// this is the normal case
if (theoreticalOut > 0) {
m_log.log(2, "theoreticalOut and outCount",
theoreticalOut, outCount);
m_log.log(2, "startSkip and qty",
startSkip, qty);
if (outCount - startSkip <= theoreticalOut &&
outCount - startSkip + qty > theoreticalOut) {
qty = theoreticalOut - (outCount - startSkip);
m_log.log(2, "reducing qty to", qty);
}
}
m_log.log(3, "writing", qty);
size_t written = to.write(from, qty);
if (written < qty) {
m_log.log(0, "WARNING: writeOutput: buffer overrun: wanted to write and able to write", qty, written);
}
outCount += written;
m_log.log(3, "written and new outCount", written, outCount);
return;
}
// the rest of this is only used during the first startSkip samples
if (outCount + qty <= startSkip) {
m_log.log(2, "discarding with startSkip", startSkip);
m_log.log(2, "qty and outCount", qty, outCount);
outCount += qty;
return;
}
size_t off = startSkip - outCount;
m_log.log(2, "shortening with startSkip", startSkip);
m_log.log(2, "qty and outCount", qty, outCount);
m_log.log(2, "start offset and number written", off, qty - off);
to.write(from + off, qty - off);
outCount += qty;
}
int
R2Stretcher::available() const
{
Profiler profiler("R2Stretcher::available");
m_log.log(3, "R2Stretcher::available");
#ifndef NO_THREADING
if (m_threaded) {
MutexLocker locker(&m_threadSetMutex);
if (m_channelData.empty()) return 0;
} else {
if (m_channelData.empty()) return 0;
}
#endif
#ifndef NO_THREADING
if (!m_threaded) {
#endif
if (m_channelData[0]->inputSize >= 0) {
//!!! do we ever actually do this? if so, this method should not be const
// ^^^ yes, we do sometimes -- e.g. when fed a very short file
if (m_realtime) {
while (m_channelData[0]->inbuf->getReadSpace() > 0 ||
m_channelData[0]->draining) {
m_log.log(2, "calling processOneChunk from available");
if (((R2Stretcher *)this)->processOneChunk()) {
break;
}
}
} else {
for (size_t c = 0; c < m_channels; ++c) {
if (m_channelData[c]->inbuf->getReadSpace() > 0) {
m_log.log(2, "calling processChunks from available, channel" , c);
bool any = false, last = false;
((R2Stretcher *)this)->processChunks(c, any, last);
}
}
}
}
#ifndef NO_THREADING
}
#endif
size_t min = 0;
bool consumed = true;
bool haveResamplers = false;
for (size_t i = 0; i < m_channels; ++i) {
size_t availIn = m_channelData[i]->inbuf->getReadSpace();
size_t availOut = m_channelData[i]->outbuf->getReadSpace();
m_log.log(3, "available in and out", availIn, availOut);
if (i == 0 || availOut < min) min = availOut;
if (!m_channelData[i]->outputComplete) consumed = false;
if (m_channelData[i]->resampler) haveResamplers = true;
}
if (min == 0 && consumed) {
m_log.log(2, "R2Stretcher::available: end of stream");
return -1;
}
if (m_pitchScale == 1.0) {
m_log.log(3, "R2Stretcher::available (not shifting): returning", min);
return min;
}
int rv;
if (haveResamplers) {
rv = min; // resampling has already happened
} else {
rv = int(floor(min / m_pitchScale));
}
m_log.log(3, "R2Stretcher::available (shifting): returning", rv);
return rv;
}
size_t
R2Stretcher::retrieve(float *const *output, size_t samples) const
{
Profiler profiler("R2Stretcher::retrieve");
m_log.log(3, "R2Stretcher::retrieve", samples);
size_t got = samples;
for (size_t c = 0; c < m_channels; ++c) {
size_t gotHere = m_channelData[c]->outbuf->read(output[c], got);
if (gotHere < got) {
if (c > 0) {
m_log.log(0, "R2Stretcher::retrieve: WARNING: channel imbalance detected");
}
got = gotHere;
}
}
if ((m_options & RubberBandStretcher::OptionChannelsTogether) &&
(m_channels >= 2)) {
for (size_t i = 0; i < got; ++i) {
float mid = output[0][i];
float side = output[1][i];
float left = mid + side;
float right = mid - side;
output[0][i] = left;
output[1][i] = right;
}
}
m_log.log(3, "R2Stretcher::retrieve returning", got);
return got;
}
}
Reference in New Issue View Git Blame Copy Permalink